很多雅思考生一直想要?jiǎng)蜓潘?2寫作資料，但是卻總是找不到，現在烤鴨不用擔心了，上海新航道雅思小編為大家馬上帶來關于劍橋雅思12寫作范文Test8Task1的內容，供大家參考。

  劍橋雅思12寫作Task1題目

  The diagram below shows how geothermal energy is used to produce electricity. Summarise the information by selecting and reporting the main features, and make ! comparisons where relevant.

  題目分析，包括寫作中需要討論的主要特征以及考生可能對題目產生的錯誤理解。

  要點

  1.考生需要描寫清楚整個流程中的邏輯關系;

  2.考生需要用到圖中所有的文字信息。

  錯誤理解

  1.考生無法將兩個流程的歩驟有邏輯地串聯起來;

  2.考生可能不認識圖中的某些詞匯(如Geothermal zone)，從而不知道如何運用這些單詞;

  3.考生可能因?yàn)椴恢廊绾尉唧w擴展而無法寫滿字?jǐn)?shù)。

  劍橋雅思12寫作task1范文一

  The diagram illustrates the process of producing electricity with geothermal energy in a geothermal power plant.

  There are several important steps in energy producing. A huge container should be first prepared for storing up adequate cold water. The water is then pumped from the surface down in a 4.5km deep injection well. Geothermal zone is the next station for the water and here the rocks are hot. After running through geothermal zone to the production well, the water gains a higher temperature. Next, the hot water is ready to be pumped back to the surface into a larger container called condenser. This is done by turning hot water into steam and then directing the steam at a turbine. The steam turns the turbine blades, converting heat into mechanical power. This in turn runs the generator, which produces electricity.

  In summary, electricity is produced in the geothermal power plant in several steps: the first step is to heat water, followed by turning it into steam and finally powering the generator to produce energy.

  此圖說明了地?zé)崮馨l(fā)電廠用地?zé)岚l(fā)電的過程。

  能源發電有幾個重要的步驟。首先，一個巨大的容器用來盛裝足夠的冷水。然后將這些水從地表打到深4.5千米的注水井。此后，這些水將經過地?zé)釁^(qū)，這里的巖石非常燙。在流過這些炙熱的巖石后，這些水將到達生產井，水的溫度將上升。接下來，熱水等待著被抽回地表，并進入一個更大的容器，稱為冷凝器。隨后這些熱水會在此轉化為蒸汽，并被導入渦輪機。這些蒸汽開始使得渦輪機慢慢轉動，將熱能轉化為機械發電。這轉而帶動了發電機，并提供電力。

  總而言之，地?zé)岚l(fā)電廠的電是分幾個步驟來產生的：先是將水加熱，然后將水變?yōu)檎羝ㄟ^發電機進行發電。

  劍橋雅思12寫作task1范文二

  The diagram outlines how electricity is generated from geothermal energy in a geothermal power plant.

  The entire electricity-producing process can be divided into several steps. First of all, a huge container on the ground is prepared for cold water. Next, the water is then pumped down an injection well which is as deep as 4.5km.When water reaches the injection well,it runs through hot rocks called a Geothermal zone and is heated up. After the heating process, the hot water is then pumped to the surface into a large condenser up the production well and then turns into steam. Finally, the condenser directs the steam at a turbine, converting heat into mechanical power. This in turn runs the generator, which creates electricity.

  In summary, the geothermal power plant is used to generate electricity in three main stages：heating water followed by turning it into steam, and finally powering the generator to produce electricity.

  此圖敘述了地?zé)崮馨l(fā)電廠如何通過地?zé)岚l(fā)電的。

  整個發電過程可以分為幾個步驟.首先，地表上一個巨大的容器用來盛裝冷水。然后， 這些水會被打到4.5米深的地下注水井。當水到達注水井，會通過炙熱的巖石，或稱地?zé)釁^(qū)，這些水會被加熱。在熱處理之后，這些熱水會被注入地表，進入到生產井上面的一個大型冷凝器中，然后變成蒸汽。最后，冷凝器會將蒸汽送到渦輪機，將熱能轉化為機械發電。這轉而帶動發電機發電。

  總而言之，地?zé)崮馨l(fā)電廠被用于發電主要為三個階段。第一階段是加熱水，然后將其轉化為蒸汽，最后帶動發電機來發電。

  以上就是劍12雅思寫作范文，更多雅思資料，請點擊：雅思資料頻道